Case

Scans

Upper: not loaded

Lower: not loaded

Patient & report

Patient Chart #

Notes

Cloud sync

Email Password

Motion

Articulate

Load both jaws — or splice a full-mouth scan — to unlock.

Opening 0.0° Protrusion 0.0 mm Lateral (R − / L +) 0.0 mm

Nothing moves in a straight line: protrusion glides down the condylar eminence (slope = the inclination set in Setup), lateral drops the orbiting condyle along its Bennett path, and opening is pure hinge rotation only through the first ~18 mm — wider, the condyles glide down the eminence too, and the Protrusion slider follows (it reads the jaw's total forward translation). The incisal readouts below show the combined move.

Incisal point

Vertical (open)—

Anterior / posterior—

Lateral (R − / L +)—

Total—

Condylar travel

Left—

Right—

Saved positions

Name the current jaw position (e.g. an orthotic's therapeutic position) — it saves with the case and reapplies in one click.

Name

Occlusal contacts

Contact heat-map Map range

interferencecontact1.5 mm

Closest approach—

Deepest interference—

Splint Lab

Guided workflow

1 · Arch scans. Upper and lower, scanned mouth slightly open — two separate files.

No scans loaded — or try the sample case

2 · Bite scans. Left and right side bites, patient biting down. They are never shown as models — their math alone moves the arches into the true bite (runs automatically).

Bite seat (RMS)—

3 · Bite space. The target gap is the clinical minimum — day splints ~1 mm, night guards 2–3 mm, sleep appliances ~2.5 mm with the jaw advanced. Generation sizes the real opening automatically: a deep bite is opened just far enough that the splint keeps 1 mm printable walls and the molars never touch.

Target gap

Current interocclusal gap—

4 · Appliance.

Type On jaw

Canine guidance ramps Slope off distally — molars never contact Opposing tooth imprints (grooves) Imprint depth Ramp angle Min wall Splint follows the jaw position

Splint—

5 · Check & ship. Verify even contact and smooth excursions (digital articulating paper), then export for the printer — or package a print order for the lab.

Excursions—

Setup

Mounting

Adjust Mode

Bite registration

Left and right buccal bite scans (patient biting down) are registration data only — never rendered as models. Their math moves the upper and lower models into the patient's true bite.

Left bite: not loaded

Right bite: not loaded

Bite seat (RMS)—

Articulator settings

Condylar inclination Bennett angle Intercondylar width Bonwill length Balkwill angle

🦷

Digital Dental Lab

Drop scan files anywhere in this window —
or start with:

STL · PLY · OBJ · 3Shape DCM · DICOM (CBCT) — upper & lower arches plus left/right bite scans, or one full-mouth scan

Jaw 0°

Digital Dental Lab

✦ What’s new in the Dental Lab